Hydraulic Top Link Cat.3 with Hook Inc. Locking Block Min. 25 3/4″→ Max. 36 13/16” with 2 x Hoses, Stroke. 11”

Description

The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. This requires a double acting control valve on the tractor – an unbeatable combination in combination with the integrated locking block *.

* When adjusting the hydraulic top link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, because the tractor’s control units do not lock as tightly. This hydraulic top link is therefore equipped with a locking block. With this valve, the oil in the cylinder is enclosed by a non-return valve. Only when oil pressure returns from the tractor does the valve open and the cylinder can be adjusted.

• High quality finish and painted black
• Includes locking block
• 2 x hydraulic connection
• Delivery is fully assembled

Technical specifications:

• Category: 3
• Pin hole: 1 1/4″ / 32,4 mm
• Cylinder bore: 80 X 90
• Rod diameter: 1.57″ / 40mm
• Hydraulic pressure: max. 3600 PSI / 250 bar
• Thrust force: 20300 Lbs / 9.2 T
• Pull force: 15200 Lbs / 6.9 T

2 x hydraulic hose with plug and dust cap

• Connection: 12-L bulkhead size 3 (common coupling connector), 18-1.5 SW22 nipple + union
• Hose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 W.P.330
• Working pressure: 2600 PSI / 180 bar
• Length: 19.5″ / 75 cm