Hydraulic Top Link Cat. 1-1 (14 3/16” – 18 1/2”) with Locking Block and 2 x Hoses

Description

The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this – an unbeatable combination in combination with the integrated locking block *.

* When adjusting the top link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor’s control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted.

• High quality, painted black
• Incl. locking block
• Top link Cat. 1
• 2 x hydraulic connection
• Delivery is completely assembled

Technical specifications:

• Hydraulic connection: 3/8″
• Tractor top link with Ø19mm (3/4”) pin holes on both ends (the piston can be rotated as needed)
• Ball width: 44mm  (1-3/4”) (both ends)
• Cylinder bore: Ø50mm ( 2”)
• Cat. 1 top link rod diameter: Ø30mm  (1-3/16”)
• Hydraulic pressure max. 250 bar
• Thrust: 3.5 ton
• Pulling force: 2.3 ton
• Weight: about 17 pounds / 8 kg

2 x hydraulic hose with plug and dust cover

• Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + union
• Hose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10
• Operating pressure: 180 bar
• Length: 75 cm