Cat 2 Hydraulic Top Links with Hook and Clevis
These Cat 2 hydraulic top links combine a hook with a clevis mounting. Both versions have a 63 mm cylinder bore and a 35 mm piston rod. Compare the length range and both end fittings.
CHECK FIRST, THEN CHOOSE
Choose your top link by category, mounting dimensions, retracted and extended length, cylinder bore and piston rod diameter. Check both ends and compare the technical drawing with your tractor and implement. Category or tractor brand alone does not establish compatibility.
Compare length and stroke
| Product · bore/rod | Length¹ | Stroke |
|---|---|---|
|
SPH320059 63/35 mm |
585–795 mm | 210 mm |
|
SPH320060 63/35 mm |
655–935 mm | 280 mm |
¹ Retracted–extended length from the metric product drawing. These are examples; open the product for all mounting dimensions and supplied components.
Both drawings show Ø25.4 mm at the mounting points. Check the clevis width, mounting position and clearance as well. A clevis is not automatically interchangeable with a ball joint.
Which dimensions should you compare?
A suitable hydraulic top link must match both the mounting points and the required adjustment range. Check these points before ordering:
Category and mounting dimensions: compare the pin size and the width or clearance available at both ends.
Retracted and extended length: check the measurement points on the technical drawing and compare the full range with your application. Stroke alone is not enough.
Hydraulic controls and connections: check the required controls, hose length and couplings on the product page and on your tractor.
Also compare the connection and profile of the quick couplings. The same nominal connection size alone does not confirm that two couplings will fit together.
Compare configurations
Category 2 Hydraulic Top Links · Standard Cat 2 Hydraulic Top Links · Cat 2 Hydraulic Top Links with Hook · Cat 2 Hydraulic Top Links with Hook and Clevis
Need individual parts? View our top link accessories and repair parts. Select replacement parts according to the specifications of your own configuration.
Frequently asked questions about hydraulic top links
Will a hydraulic top link fit any tractor brand?
Compatibility depends on the three-point linkage, mounting dimensions, required length and hydraulic connections. Choose according to the configuration and technical drawing, rather than tractor brand alone.
How do I measure the top link length I need?
Compare the required retracted and extended lengths with the drawing for your chosen product. Use the same measurement points as the drawing. Allow for clearance around the end fittings; comparing only the overall outside length or stroke is not enough.
Are hoses and quick couplings included?
This depends on the product. Check the supplied components, hose length and coupling configuration on the product page. This shows what is included and what else you may need.
Need help choosing your hydraulic top link?
Unsure which configuration you need? Send us your tractor model, photos of the mounting points and the dimensions of your current top link via WhatsApp. Tell us which implement you intend to use so we can help you check the options.
Send your photos via WhatsApp