Cat 3 Hydraulic Top Links with Hook and Clevis
These Cat 3 hydraulic top links with hook and clevis are available in 80/40 and 90/45 mm. Compare the length range and clevis mounting dimensions. All three metric drawings specify Ø32.4 mm at both mounting holes.
Compare the clevis versions
| Product · bore/rod | Length¹ | Stroke |
|---|---|---|
| SPH320061 80/40 mm | 635–845 mm | 210 mm |
| SPH320062 80/40 mm | 700–980 mm | 280 mm |
| SPH320200 90/45 mm | 650–860 mm | 210 mm |
¹ Retracted–extended length according to the metric product drawing. Open the product for all mounting dimensions and supplied components.
Cylinder bore and piston rod
SPH320061 and SPH320062 have an 80 mm bore and 40 mm rod. SPH320200 has a 90 mm bore and 45 mm rod, with a different clevis construction shown on its drawing. Compare the mounting dimensions and clearance; equal hole diameters do not mean identical mountings.
Which dimensions should you compare?
A suitable hydraulic top link must match both the mounting points and the required adjustment range. Check these points before ordering:
Category and mounting dimensions: compare the pin size and the width or clearance available at both ends.
Retracted and extended length: check the measurement points on the technical drawing and compare the full range with your application. Stroke alone is not enough.
Hydraulic controls and connections: check the required controls, hose length and couplings on the product page and on your tractor.
Also compare the connection and profile of the quick couplings. The same nominal connection size alone does not confirm that two couplings will fit together.
Compare configurations
Category 3 Hydraulic Top Links · Cat 3 Hydraulic Top Links with Hook · Cat 3 Hydraulic Top Links with Hook and Clevis
Need individual parts? View our top link accessories and repair parts. Select replacement parts according to the specifications of your own configuration.
Frequently asked questions about hydraulic top links
Do all Cat 3 top links have the same mounting holes?
No. SPH320055 and SPH320056 specify Ø25.4 mm; the other five metric drawings specify Ø32.4 mm. Check both ends on the individual drawing.
Is stroke the same as overall length?
No. Stroke is the piston rod travel. Also compare the retracted and extended lengths, using the measuring points shown on the drawing.
Need help choosing your hydraulic top link?
Unsure which configuration you need? Send us your tractor model, photos of the mounting points and the dimensions of your current top link via WhatsApp. Tell us which implement you intend to use so we can help you check the options.
Send your photos via WhatsApp