Skip to product information
Hydraulic side link SPH320101 – with hoses and quick couplers
Hydraulic side link SPH320101 – with hoses and quick couplers
Hydraulic side link with ball joint (500–650 mm), including 2 hoses – SPH320101

Hydraulic side link with ball joint (500–650 mm), including 2 hoses – SPH320101

SKU :  SPH320101
€219,00
€180,99 excl. VAT
Shipping calculated at checkout.
5 in stock
2-year warranty Warranty information
Shipping to the Netherlands View shipping information
Excellent on Trustpilot Read our reviews
2-year warranty View Shipping to the Netherlands View Excellent on Trustpilot Reviews

Description

This hydraulic side link has a centre-to-centre length of 500–650 mm, a 150 mm stroke and a ball joint at the cylinder end. It uses the tractor hydraulics to adjust the lateral tilt of an implement on the three-point linkage. Supplied with two 85 cm hydraulic hoses and quick couplers with dust caps.

Does this version fit your tractor?

Check the length range and both mounting points against your existing lift link. The cylinder-end connection is a ball joint: hole Ø19.5 mm; ball width 40 mm. The rod end has a clevis with a round Ø26 mm hole and an elongated hole. The internal width of the rod-end clevis is 33 mm.

Length alone does not confirm compatibility. Check the pin fit, mounting widths and clearance throughout the full lift movement. A double-acting hydraulic connection is required.

What is included?

  • 1 hydraulic side link with fitted valve block.
  • 2 hydraulic hoses, 85 cm long.
  • 2 poppet-style hydraulic quick couplers with ½″ BSP male thread and dust caps.

Technical specifications

Part numberSPH320101
Minimum centre-to-centre length500 mm
Maximum centre-to-centre length650 mm
Stroke150 mm
Cylinder boreØ60 mm
Piston rod diameterØ40 mm
Cylinder-end connectionball joint
Cylinder-end holeØ19.5 mm
Cylinder-end widthball width: 40 mm
Rod-end connectionClevis with round and elongated holes
Rod-end round holeØ26 mm
Rod-end internal clevis width33 mm
Valve-block portsG3/8″ (2×)
Hose length85 cm
Quick couplersPoppet style, ½″ BSP male thread
Piston rodRotatable

The drawing measures the mounting length from the centre of the cylinder-end mounting hole to the centre of the round hole at the rod end. The elongated hole is not the reference point. Hole diameters are drawing dimensions, not inferred nominal pin sizes or linkage categories.

View the technical drawing in millimetres

Rotating piston rod

The piston rod can be rotated as needed to adjust the orientation of the rod-end connection.

Checks before installation

Compare both connections, the length range and the available space. Check that the hoses and couplers match the tractor connections and remain clear of moving parts. Confirm the permitted working pressure of the complete assembly using the component specifications and tractor manual. Install and inspect according to the applicable tractor and hydraulic-component instructions.

Compare all hydraulic side links

Frequently asked questions

Is this a hydraulic top link?

No. This side link adjusts the lateral tilt of the implement. A top link adjusts its fore-and-aft angle.

Does it fit every tractor?

No. Check the mounting length, connection dimensions, clearance and hydraulic connections against the drawing and your existing lift link.

How do I measure the length range?

Measure between the centres of the mounting holes shown on the drawing. For this version, use the round hole at the rod end.

Need help choosing?

Send us your tractor model, photos of both mounting points and the measurements of your current lift link via WhatsApp. Tell us which implement you use. The product code is already included in the message.

Ask for advice via WhatsApp
Hydraulic side link SPH320101 – with hoses and quick couplers

Hydraulic side link with ball joint (500–650 mm), including 2 hoses – SPH320101

2-year warranty
Fast delivery to the Netherlands
Excellent on Trustpilot
€219,00
€180,99 excl. VAT

You may also like